压PGB0631.100 G1/4
压PGB0631.1600 G1/4
压咏头MAV1/4 MA3
压咏头 MA31/4 ED
GP-130-00 N Y PROTECTOR GAUGE, PFA PVDF NO GAUGE 1/4 FNPT PFA NO GAUGE
GP-131-01 N Y PROTECTOR GAUGE, PFA PVDF 0-30 PISG 1/4 FNPT PFA FACTORY
GP-131-02 N Y PROTECTOR GAUGE, PFA PVDF 0-60 PSIG 1/4 FNPT PFA FACTORY
GP-131-03 N Y PROTECTOR GAUGE, PFA PVDF 0-160 PSIG 1/4 FNPT PFA FACTORY
GP-131-323 N N PROTECTOR GAUGE, PFA PVDF CUSTOM 1/4 FNPT PFA NO GAUGE TRANSDUCER
GP-530-00 N Y PROTECTOR GAUGE, PFA PVDF NO GAUGE 1/4 MNPT PFA NO GAUGE
GP-531-01 N Y PROTECTOR GAUGE, PFA PVDF 0-30 PISG 1/4 MNPT PFA FACTORY
GP-531-02 N Y PROTECTOR GAUGE, PFA PVDF 0-60 PSIG 1/4 MNPT PFA FACTORY
GP-531-03 N Y PROTECTOR GAUGE, PFA PVDF 0-160 PSIG 1/4 MNPT PFA FACTORY
GP-630-00 N Y PROTECTOR GAUGE, PFA PVDF NO GAUGE 1/4 FLARE PFA NO GAUGE
GP-631-01 N Y PROTECTOR GAUGE, PFA PVDF 0-30 PISG 1/4 FLARE PFA FACTORY
GP-631-02 N Y PROTECTOR GAUGE, PFA PVDF 0-60 PSIG 1/4 FLARE PFA FACTORY
GP-631-03 N Y PROTECTOR GAUGE, PFA PVDF 0-160 PSIG 1/4 FLARE PFA FACTORY
GP-631-06 N N PROTECTOR GAUGE, PFA PVDF CUSTOM 1/4 FLARE

PART NO. CONFIGURATOR CAD PRODUCT TYPE TRIM PRESSURE RANGE SIZE CONNECTION BODY MATERIAL GAUGE ADDITIONAL DETAIL TRADE/BRAND NAME SYNONYM
GP-130-00 N Y PROTECTOR GAUGE, PFA PVDF NO GAUGE 1/4 FNPT PFA NO GAUGE
GP-131-01 N Y PROTECTOR GAUGE, PFA PVDF 0-30 PISG 1/4 FNPT PFA FACTORY
GP-131-02 N Y PROTECTOR GAUGE, PFA PVDF 0-60 PSIG 1/4 FNPT PFA FACTORY
GP-131-03 N Y PROTECTOR GAUGE, PFA PVDF 0-160 PSIG 1/4 FNPT PFA FACTORY
GP-131-323 N N PROTECTOR GAUGE, PFA PVDF CUSTOM 1/4 FNPT PFA NO GAUGE TRANSDUCER
GP-530-00 N Y PROTECTOR GAUGE, PFA PVDF NO GAUGE 1/4 MNPT PFA NO GAUGE
GP-531-01 N Y PROTECTOR GAUGE, PFA PVDF 0-30 PISG 1/4 MNPT PFA FACTORY
GP-531-02 N Y PROTECTOR GAUGE, PFA PVDF 0-60 PSIG 1/4 MNPT PFA FACTORY
GP-531-03 N Y PROTECTOR GAUGE, PFA PVDF 0-160 PSIG 1/4 MNPT PFA FACTORY
GP-630-00 N Y PROTECTOR GAUGE, PFA PVDF NO GAUGE 1/4 FLARE PFA NO GAUGE
GP-631-01 N Y PROTECTOR GAUGE, PFA PVDF 0-30 PISG 1/4 FLARE PFA FACTORY
GP-631-02 N Y PROTECTOR GAUGE, PFA PVDF 0-60 PSIG 1/4 FLARE PFA FACTORY
GP-631-03 N Y PROTECTOR GAUGE, PFA PVDF 0-160 PSIG 1/4 FLARE PFA FACTORY
GP-631-06 N N PROTECTOR GAUGE, PFA PVDF CUSTOM 1/4 FLARE PFA CUSTOM

Finding design solutions for reservoir requirements
Parkers Filter Division Europe manufactures innovative, lightweight co-polymer reservoirs, that can feature an integrated, patented and environmentally friendly LEIF. filter element and an ecological air filter. Ideally suited for mobile hydraulic systems, such as forklift trucks, telescopic handlers and agricultural sprayers, the all-in-one design of the reservoir means that it can be specified as a complete unit, helping mobile equipment manufacturers to cut costs, save time and increase efficiency.
The environmentally friendly LEIF. (Low Environmental Impact Filter) element has been designed to allow the outer metal filter sleeve to be re-used. As a result, only the contaminated filter medium has to be disposed of as chemical waste, helping to reduce disposal and processing costs by as much as 50%.
Connection points for support devices, such as suction pumps, drains or filler openings, can be easily incorporated into the lightweight reservoir, with metal connectors being available for hose couplings, and flange or thread attachments. Each metal connector is moulded into the co-polymer reservoir wall, ensuring a reliable, leak-proof connection between the reservoir and ancillary components. In addition, an oil level indicator can be fully integrated into the design, eliminating the need for level glasses, which are fragile and a potential source of leakage if mounted incorrectly.
The dimensions, shape and design of the lightweight reservoir can be fully adapted to meet the specific needs of each customer, with each reservoir being specified as a single unit. This can help OEMs to reduce inventory, assembly and maintenance costs.
The co-polymer reservoir forms part of a product family comprising filters and filtration products, which have been designed to combine exceptional levels of performance and reliability in robust, virtually zero maintenance units.
Environmental Air Filters

Reservoir Equipment

EAB Series

Typical Applications

Agricultural machines Articulated dump trucks Forestry equipment Wheeled loaders Lubricating systems Excavators Mobile cranes Industrial power units

Technical Data

The breather has been designed to achieve a low pressure drop and high dirt holding capacity with airflows up to 1500 l/min. A compact EAB10 with airflows up to 1000 l/min is also available.
Construction:
Glass reinforced composite housing with Eco-element.
Filter media options:
P020: High quality polyester media. 2m (abs).
C015: Polyester media with water-resistant layer. 1.5m (abs)
Q010: Glass fibre media. 1.0m (abs)

Mounting options:
With 6 screws. Includes machine and plate screws, a strainer and
gaskets.
External threads G3/4, G1.
Internal thread G3/4.

Pressure Drop Curves
Options:
Visual gauge type vacuum/pressure indicator.
Overpressure valve, pressure setting 0.2 bar. (available for EAB20 only)

Advantages of the EAB-breathers:
Easy maintenance.
Indicator states the need for element change.
Quick and easy element change (no tools required).

Environmentally friendly:
EAB elements contains no metal parts: therefore it can be crushed and burned minimising the volume of waste material.
Other features:
The optional indicator is located in a safe place inside the housing. Housing includes mounting holes for a padlock, which allows you to increase the security against theft and vandalism.
p total = p housing + p element. The recommended level of the initial pressure drop for this filter is max 0.02 bar (2.0 kPa).

178 Parker Hannifin Filter Division Europe FDHB200UK. Section 24

Reservoir Equipment

EAB Series

Ordering Information
Standard products table
Part number Supercedes Model Media Mounting Overpressure valve Indicator Replacement elements
EAB20P020HC73V2 EAB20P020HC73-V2 EAB20 P020 HC73 V2 A EAB20P020
EAB10P020HC73 N/A EAB20 P020 HC73 EAB20P020
EAB20P020HC73 N/A EAB20 P020 HC73 EAB20P020
EAB20P020GE16 N/A EAB20 P020 GE16 EAB20P020
EAB20P020HC73A EAB20P020HC73-A EAB20 P020 HC73 EAB20P020
EAC20P020 N/A EAC20 P020 EAC20P020

Product configurator

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

180 Parker Hannifin Filter Division Europe FDHB200UK. Section 24
Reservoir Equipment

ABL Series
Typical Applications
The Parker Filtration ABL-1 and ABL-2 Series Air Filters.

Saw mills Agricultural machines Articulated dump trucks Forestry equipment Wheeled loaders Lubricating systems Excavators Industrial power units

Mobile cranes

Pressure Drop Curves
ABL1 ABL2

ABL Series
Specification
ABL-1 ABL-2

182 Parker Hannifin
Filter Division Europe
FDHB200UK. Section 24

Ordering Information

Standard products table
Part number Supercedes Replacement elements
ABL1G114QXWL3 ABL1-G11/4-QXWL-3 QXWL3
ABL2G114QXWL13V ABL2-G11/4-QXWL-1-3-V QXWL13
ABL2U112QXWL13V ABL2-U11/2-QXWL-1-3-V QXWL13
ADAPTORABLG114FP ADAPTOR-ABL-G11/4-FP -

Product configurator

Replacement elements

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Notes

184 Parker Hannifin Filter Division Europe FDHB200UK.

Glass-Filled Nylon and Metal Air Filters

IP65 Rated, Metal, Screw-on and Lockables

Reservoir Equipment

IP65 Rated Filler Breather Filters

Specification for Single and 6 Hole Installation

Option 1
Construction:
Moulded in non-corrodible glass-filled nylon combining strength with a lightweight design.
Options:
(1) single (63mm dia) hole
Filler breather installation that eliminates drilled and tapped holes using self-locking clamps.
(2) 6 hole
Filler Breather Installation that uses 6 x No 10 thread forming screws.
(3) 3 hole filler breather
utilises 3 x zinc and clear chromate plated steel screws.
Option 1 Filler Breathers (Single Hole Installation)
Strainers:
Unique design diffuses oil flow into the reservoir.
(1)
Single length inpolypropylene (95mm length)

(2)
2-piece telescopic inpolypropylene (195mm length max.)

Filtration element:
Expanded polyurethane foam, 10 micron.
Seals:
Nitrile.
Working temperature:
-30C to +90C.
Pressurised filler breathers:
Available in 3 pressure options to maintain a positive pressure in a reservoir.
Pressurisation options:
0.2, 0.35 and 0.7 bar crack pressure.
Pressurisation valve:
Nylon/Nitrile.
Dipstick:
Available for use with options 1 and 2. Dipsticks are available in 2 lengths and in packs of 10.
Dipstick material:
ABS.
Hi/Lo indicators:
Acetal. Adjustable Red/Green level indicators.
Dipstick lengths:
200mm and 400mm.
Breather weight:
0.2Kg.
Anti-splash feature:
The unique design anti-splash feature is standard on all options 1 and 2 and allows for a dipstick to be fitted if required.

p (PSID)

AB98XXX Non-Pressurised Pressure Drop Curves
0.25
0.20
0.15
0.10
Option 1. Single Hole Filler Breathers C Pressurised 0.05

0 0 5 1015 Flow I/sec (Air)
Option 1. Single Hole Filler Breathers C Non-Pressurised
0

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

186 Parker Hannifin Filter Division Europe FDHB200UK. Section 25
Filler Breathers (6 Hole Installation)

Option 2 Note 1. Un-pressurised 6 hole fixing:
Form 6 off tank mounting holes between .4.0 and 4.4mm (dependent on the material and thickness C see guide below) equispaced on 70-73mm P.C.D. to suit supplied No.10 thread forming screws.
Note 2. Pressurised 6-hole fixing:
Form 6 off tank mounting holes between .4.0 and .4.4mm (dependent on the material and thickness C see guide below) equispaced on 73mm P.C.D. to suit supplied No.10 thread forming screws.
Note 3. Reservoir mounting guide
Sheet thickness mm Hole size mm
1.2
4.0

2.0
4.10

3.15
4.30

4.0
4.30

5.0
4.40

.101
167
72
Option 2. 6 Hole Filler Breathers C Pressurised
Part number AB98817011 AB98812001 AB98812011 AB98812021 AB98813001 AB98813011 AB98813021 AB98817001 AB98817021 Supercedes AB.98817011.UC AB.98812001.UC AB.98812011.UC AB.98812021.UC AB.98813001.UC AB.98813011.UC AB.98813021.UC AB.98817001.UC AB.98817021.UC Description 10 pressurised 0.7bar with 95mm strainer 10 pressurised 0.2bar without strainer 10 pressurised 0.2bar with 95mm strainer 10 pressurised 0.2bar with telescopic strainer 10 pressurised 0.35bar without strainer 10 pressurised 0.35bar with 95mm strainer 10 pressurised 0.35bar with telescopic strainer 10 pressurised 0.7bar without strainer 10 pressurised 0.7bar with telescopic strainer

.42
Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Option 2. 6 Hole Filler Breathers C Non-Pressurised

Note 1: Part numbers featured with bold highlighted codes will
A
4.4
6x .
7370
ensure a standard product selection.
Note 2: Alternate displayed part number selection will require

4.0

Reservoir Equipment

Filler Breather Filters

Option 3 Filler Breathers (3 Hole Installation)
New Options Fully Tested
As part of the design development programme for the new IP65 Filler Breathers, extensive performance and endurance testing was carried out to ensure durability and efficiency.

Note: Form 3 off tank mounting holes between .4.0 and .4.4mm (dependent on the material and thickness C see chart for guide) equispaced on 41.3 P.C.D. to suit No. 10 thread forming screws supplied.
Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. Note 3: Not suitable for use with B.68206/207 Note 4: 6-hole AB.68910/AB.68918 option available.
Dipstick Options

188 Parker Hannifin Filter Division Europe FDHB200UK. Section 25
Reservoir Equipment

Screw-On Type Air Breathers

Standard Screw-On Breathers - Specification

Pressure Drop Flow Curve
Option 1C G1/2 and G3/4 (.101)
Construction:
Moulded in non-corrodible glass-filled nylon combining strength with a lightweight design.
Option 1:
2 screw on type air breathers are available C G1/2 or G3/4 threaded base models.
Filtration element:
Expanded polyurethane foam, 10 micron.
Seals:
Nitrile.
Working temperature:
-30C to +90C.
Pressurised air breathers:
Available in 3 pressure options to maintain a positive pressure in a reservoir.
Pressurisation options:
0.2, 0.35 and 0.7 bar crack pressure.
Pressurisation valve:
Nylon/Nitrile.
Dipstick:
Available for use with all options. Dipsticks are available in 2 lengths and in packs of 10.
Dipstick material:
ABS.
Hi/Lo indicators:
Acetal. Adjustable red/green level indicators.
Dipstick lengths:
200mm and 400mm.
Breather weight:
0.2Kg.
Anti-splash feature:
The unique design anti-splash feature is standard on option 1 and allows for a dipstick to be fitted if required.
AB98XXX Screw-on Non-Pressurised Pressure Drop Curves

Note: For pressure drop information on the Option 1. Pressurised consult Parker Filtration.
Option 1 C G1/2 or G3/4
Part number AB98610101 AB98612101 AB98613101 AB98617101 AB98410101 AB98412101 AB98413101 AB98417101 Supercedes AB.98610101.UC AB.98612101.UC AB.98613101.UC AB.98617101.UC AB.98410101.UC AB.98412101.UC AB.98413101.UC AB.98417101.UC Description 10 G1/2 Un-pressurised 10 G1/2 pressurised 0.2 bar 10 G1/2 pressurised 0.35 bar 10 G1/2 pressurised 0.7 bar 10 G3/4 Un-pressurised 10 G3/4 pressurised 0.2 bar 10 G3/4 pressurised 0.35 bar 10 G3/4 pressurised 0.7 bar

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Reservoir Equipment

Screw-On Type Air Breathers

Compact Screw-On Breathers - Specification
Option 2 C G1/4,G3/8, R1/2 and R3/4 (.40)
Construction: Hi/Lo indicators:
G1/4, G3/8, R1/2 and R3/4 cap and base plate mouldings in nylon 66. Acetal adjustable red/green level indicators.
Element: Dipstick lengths:
Expanded Polyurethane foam, 10 micron. 200mm and 400mm (packs of 10).
Dipstick: Breather weights:
Available for use with R1/2 and R3/4. 0.028Kg
Dipstick material:
ABS.
Pressure Drop Flow Curve Ordering Information

Option 2 C G1/4,G3/8, R1/2 and R3/4

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Note: For pressure drop information on G3/8, R1/2 and R3/4, consult Parker Filtration.

190 Parker Hannifin Filter Division Europe FDHB200UK. Section 25
Screw-On Type Air Breathers - Specification

Option 3 C G3/8,G1/2 and G3/4 (.70)
Construction:
Mouldings in glass-filled nylon and glass coupled polypropylene.
Element:
Expanded Polyurethane foam, 10 micron.
Seals:
Nitrile.
Pressurised air breathers:
Available G3/8, G1/2 and G3/4,
3 pressure options to maintain a positive pressure in a reservoir.

Pressurisation options:
0.2, 0.35 and 0.7 bar crack pressure.
Pressure Drop Flow Curve
Pressurisation valve:
Nylon.
Dipstick:
Available for use with G3/8, G1/2 and G3/4.
Dipstick material:
Mini-series in brass.
Hi/Lo indicators:
Acetal adjustable red/green level indicators.
Dipstick lengths:
200mm and 400mm (packs of 10).
Breather weights:
0.075Kg, Mini-series C 0.019Kg.
Ordering Information

Option 3 C G3/8,G1/2 and G3/4

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Reservoir Equipment

Filler Breather Filters (Metal)

Metal Airbreather/Filler breather Specification

Locking lug option (5561)
For added security, certain Parker Filtration Metal Filler Breather Filters can be specified with a locking lug option.
Ordering Information

Standard products table

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

192 Parker Hannifin Filter Division Europe FDHB200UK. Section 26

1731 - Threaded type (Pressurised)
Displacement: Weight:
430 l/min. 0.2 Kg.
Micron rating: Thread:
10 G3/4.
Air flow: Valve crack-pressure:
0.45m3/min. 0.35 and
0.7 bar.

1562 = 430 l/min. 1562 = 0.20 Kg. 1563 = 135 l/min. 1563 = 0.06 Kg.
Micron rating: Thread:
10 1562 = G3/4.
1563 = G1/4.
Air flow:
1562 = 0.45m3/min. 1563 = 0.15m3/min.

1380 - Filter flange type
Displacement: Air flow:
135 l/min. 0.15m3/min.
Micron rating: Weight:
10 0.08 Kg.
Tank installation notes
1. Un-pressurised 6 hole fixing
Form off tank mounting holes between .4.0 and .4.4 (dependant on the material and thickness, consult Parker Filtration) equispaced on 70.0-73.0 P.C.D. to suit No. 10 thread forming screws supplied.
Breather Units
2. Pressurised 6 hole fixing 3. Un-pressurised 3 hole fixing
Form 6 off mounting holes between Form 3 off tank mounting holes .4.0 and .4.4 equispaced on 73.0 between .4.0 and .4.4 equispaced on
P.C.D. to suit41.3 P.C.D. to suit No. 10 thread forming screws supplied. No. 10 thread forming screws supplied.
Ordering Information Reservoir Equipment
H00279001 Part number H00279-001 Supercedes Small breather 1/4 BSPT thread Description
H00279002 H00279003 H00279-002 H00279-003 Small breather 3/8 BSPT thread Small breather 1/2 BSPT thread

Lockable Filler Breather

Installation Details

Tank Mounting

Ordering Information
LFC622142 Part number Description Non-breathing (No element) Clamp mounting with strainer
LFC622212 10 element, G2 thread with strainer
LFC622242 10 element, clamp mounting with strainer
LFC622432 LFC622122 10 vented (air in) push on mounting with strainer Non-breathing (No element) 2 BSP thread with strainer

LFC622222
10 element, G21/2 thread with strainer

LFC622411
10 vented (air in) G2 thread without strainer Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

194 Parker Hannifin Filter Division Europe FDHB200UK. Section 26
Spin-On Air Breathers

Spin-On Air Breathers

Specification

High capacity air filters designed for the removal of airborne
contamination in hydraulic systems to support environmental
maintenance.

Ideal for high flow systems and heavily contaminated
environments.
Disposable spin-on elements quickly and easily replaced.
5 micron quality filtration elements.
2 models available C 700 l/min and 1500 l/min.
Available with a pressurised valve in the mounting adaptor.

Standard spin-on air breather stem
.94 Reservoir cutout .25 maximum

.63.5 .51
B 60 A 6
A
B
.97
Circuit symbol (standard)
3 off M6 fixing holes
equispaced on 41.3 P.C.D.

Pressurised spin-on air breather stem
Reservoir cutout .25 maximum Circuit symbol (pressurised)

Note: Spin-on air breather elements can 3 off M6 fixing holes also be mounted directly on to any suitable equispaced on 50 P.C.D. length of 3/4 BSP threaded pipe.
Ordering Information

5 Spin-on air breathers
Part number Supercedes Air flow Valve crack pressure A mm B mm Weight Replacement element
S.340056 N/A 700 l/min Unpressurised 60 120 0.6Kg 4930
S.340052 N/A 1500 l/min Unpressurised 148 208 0.75Kg 588410
S.340058 *S.340058 700 l/min 0.35 Bar 60 120 0.69Kg 4930
S.340059 **S.340059 700 l/min 0.70 Bar 60 120 0.69Kg 4930
S.340054 *S.340054 1500 l/min 0.35 Bar 148 208 0.8Kg 588410
S.340055 **S.340055 1500 l/min 0.70 Bar 148 208 0.8Kg 588410

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability. Note 3: Reservoir must be capable of withstanding pressurisation.

196 Parker Hannifin Filter Division Europe FDHB200UK. Section 27

Mounting face for standard and large breather

Ordering Information

Large breather dimensions Large breather filler dimensions
Part number Supercedes Air flow Dimensions (mm) Ports
l/min A B C D
H00834004 H00834-004 1700 97 147 135 30 3/4
H00834005 H00834-005 3000 134 198 180 36 11/4

Note 1: Part numbers featured with bold highlighted codes will
ensure a standard product selection.
Note 2: Alternate displayed part number selection will require

Part number Supercedes Air flow l/min Dimensions (mm) Replacement element complete with bayonet Supercedes
A B C
H00834001 H00834-001 1700 97 165 114 H00834006 H00834-006
H00834002 H00834-002 3000 134 204 114 H00834007 H00834-007
H00834003 H00834-003 3000 134 204 203 H00834007 H00834-007

Notes

198 Parker Hannifin Filter Division Europe FDHB200UK.

Fluid Level Measurement

Fluid Level Temperature Gauges

Fluid Level/Temperature Gauges

Specification

Size 1 Installation Details
Construction:
Lens Transparent polyamide.
Lens base Nylon 66.
Shroud High impact polystyrene.
No aluminium content.
Bolts:
Steel.
Seals:
Nitrile.

Maximum working pressure:
1 bar.
Working temperature:
-30C to +90C.
Fluid compatibility:
Mineral and petroleum based oils.
Note:
A 500mm model with metal shroud finished in black available.
Recommended bolt tightening torque:
10 Nm maximum.
Thermometer scale range:
+30C to +90C.
Temperature Indicator:
Blue alcohol.
Note:
1.
Locate seals in mounting recess before fitting.

2.
Select the size required by studying the installation details to determine a part number.

For through hole mounting:
CThreadC
Hole size M10 M12
Preferred 11.0 13.0
Maximum 13.0 14.0

For tapped holes:
Holes to be tapped square to mounting face.
Tolerance on hole centres: +0.5
-0.2
For welded back nuts:

The above details should be combined.
Installation and Application Information

Simple to Install
The universal fixing is designed for either front or rear fixing. Just two holes in the tank C threaded for front fixing C and the gauge is ready to install. After positioning the gauge the bolts are simply tightened to provide a secure seal. There is no fear of leakage with the square section seals and the two-point mounting system eliminates problems with tank distortion. M10 and M12 bolt thread options are available.
Size 1 Ordering Information
Easy to Read
The high-visibility lens is one-piece for added security and moulded in shatterproof, transparent polyamide for an accurate and clear oil level and temperature indication. Further gauge protection is provided by a specially designed shroud moulded in high-impact, black polystyrene.
Standard products table
Part number FL69121 FL69123 FL69111 FL69113 Supercedes FLT.121 FLT.123 FL.111 FL.113 Desciption Fluid level/temp Fluid level/temp Fluid level Fluid level Centres 76mm 76mm 76mm 76mm Thread M10 M12 M10 M12 Max temp 90C 90C 90C 90C Weight 0.13Kg 0.13Kg 0.13Kg 0.13Kg

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

200 Parker Hannifin Filter Division Europe FDHB200UK. Section 28
Size 2 Installation Details

Size 2 Ordering Information

Standard products table
Part number FL69221 FL69223 FL69211 FL69213 Supercedes FLT.221 FLT.223 FL.211 FL.213 Desciption Fluid level/temp Fluid level/temp Fluid level Fluid level Centres 127mm 127mm 127mm 127mm Thread M10 M12 M10 M12 Max temp 90C 90C 90C 90C Weight 0.15Kg 0.15Kg 0.15Kg 0.15Kg

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Size 3 Installation Details

Size 3 Ordering Information

Standard products table
Part number FL69321 FL69323 FL69311 FL69313 Supercedes FLT.321 FLT.323 FL.311 FL.313 Desciption Fluid level/temp Fluid level/temp Fluid level Fluid level Centres 254mm 254mm 254mm 254mm Thread M10 M12 M10 M12 Max temp 90C 90C 90C 90C Weight 0.23Kg 0.23Kg 0.23Kg 0.23Kg

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Notes

202 Parker Hannifin Filter Division Europe FDHB200UK.
Reservoir Float & Level Switches

FL Series
Adjustable Float Switch
Features & Benefits

The FL Series is a range of vertically mounted, single float level switches operating on the proven reed switch and magnet principle.
The FL Series float switch can be tailored by the user for a particular application, by adjusting the length of the float switch tube. It is also possible for the user to select the switching configuration by inverting the float, giving either open on rise or close on rise operation.
The unit is supplied part assembled, with detailed instructions for the user to complete assembly to the specifications of the application and to install the unit.
Float Switch Features Include:

Float switches can be adjusted on site They can be fitted with a thermostatic switch Reliable design using reed switches Different types of mounting can be specified 3 lengths available, 500mm, 1000mm and 1500mm
The FL Series is designed to be adjusted by the user to fit their tank. The unit consists of a stem with the reed switch, thermal switch (if fitted) and float already set in position. The customer can cut the stem to fit their tank, and assemble it to the header. The unit is then ready to be fitted to the tank.
The unit has a factory set Open On Rise switching configuration, but this can be changed by reversing the float. The common temperature switches used are 60C Open On Rise or 60C Close On Rise. However, other temperature specifications may be obtained on request. A standard DIN 43650 connector is supplied with the unit.

Installation Drawing
Ordering Information
Standard products table

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

204 Parker Hannifin Filter Division Europe FDHB200UK. Section 29
Reservoir Equipment

CLS46
Capacitive Level Switch
Features & Benefits

designed to give an alarm signal if fluid falls below a preset level. It will only give an output signal after a few seconds of low level to eliminate false alarms due to turbulence. The fact that the CLS46 Series has no moving parts and incorporates a built in delay means that it is ideal in applications where mechanically operated switches mis-trigger due to vibration and fluid turbulence.
Features Include:

Rugged construction Simple to install Delay circuitry prevents false alarms Purely electronic, no moving components Integrated test feature
The CLS46 Capacitive Level Switch is designed to detect the loss of fluid below its position in the tank.
The CLS46 Series has no moving parts and it is therefore suitable for all applications, particularly where space and access inside a vessel is at a minimum.
The CLS46 Series compliments the existing range of level measurement instrumentation supplied by Parker Hannifin.

Installation Details
Ordering Information
Standard products table
CLS46 Part number Capacitive fluid level sensor Desciption
CLS46Connector Capacitive fluid level sensor connector

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

Hydraulic system protection from Parker is further confirmed with a quality range of fluid power products that include suction
strainers, check valves pressure gauges and a pipe clamping system that will ensure secure pipe installations.

For information on Parker Filtration products and technology:
Tel: +44(0)1924 487000 Fax: +44(0)1924 487001 Email: filtrationinfo@parker.com

Strainers

Reservoir Equipment
Suction Elements

Specification
Construction: * Non-standard elements are available to
Stainless steel media 30% glass filled nylon order. Consult Parker Filtration.
head. Zintec centre tube.
Epoxy adhesives.

Maximum working temperature: Flow (US GPM)
90oC.

0 13 26 39 53 66 79 92 106119 132
0.58
Filtration media: 0.04

0 0 50 100 150 200 250 300 350 400 450 500
Flow (l/min)
0
125 micron*.
Flow range: 0.03
15-500 l/min.
Bypass rating:
0.17 bar.
p (bar)
0.02
0.01
Mounting threads:
G1/2 up to G3.
Installation - Suction Elements Without Bypass Installation - Suction Elements with Bypass

Ordering Information - Without Bypass
Standard products table

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Ordering Information - With Bypass
Standard products table
Part number Supercedes Air flow l/min Ports BSP Micron rating Dimensions (mm) B Weight Bypass rating
A C
SE75111111 SE.5100 15 1/2 125 105.5 46 36 0.08 0.17 bar
SE75221111 SE.5101 25 3/4 125 109.5 64 46 0.15 0.17 bar
SE75231211 SE.5102 50 1 125 139.5 64 55 0.17 0.17 bar
SE75351211 SE.5103 95 11/2 125 140 86 65 0.28 0.17 bar
SE75351311 SE.5104 130 11/2 125 200 86 65 0.33 0.17 bar
SE75361411 SE.5105 180 2 125 260 86 75 0.40 0.17 bar
SE75461211 SE.5106 225 2 125 150 150 70 0.64 0.17 bar
SE75471311 SE.5107 350 21/2 125 212 150 90 0.72 0.17 bar
SE75481411 SE.5108 500 3 125 272 150 100 0.92 0.17 bar

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

208 Parker Hannifin Filter Division Europe FDHB200UK. Section 30
Reservoir Equipment

Diffusers
Installation Details

The effect of fitting a diffuser
Note: When installing a diffuser the plain area on the outside must be facing the pump inlet.

Ordering Information

The benefits of specifying a Parker Filtration Diffuser
Installing a Parker Filtration Diffuser in a hydraulic reservoir is a simple operation that can make a big difference to system efficiency.
With its special concentric tubes designed with discharge holes 180 opposed fluid aeration, foaming and reservoir noise are reduced and pump life extended by reducing cavitation to the pump inlet.
Diffusers manufactured to customer specifications and other sizes of diffusers are available.
Standard products table

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection.

Inline Filters
Metal Inline Filter - Specification

Construction: Max. flow: Working temperature: Flow direction:
Head C zinc. 90 l/min. -30C to +80C. From outside to inside.
Bowl C Aluminium BS1470/1050A. 1987. Max working pressure: 7 bar. Seal: Nitrile. Weight: 1.5 Kg.
Element: Zintec/Stainless steel. 125 micron*. Thread: G1. Bowl tightening torque: 12 Nm. *Alternative media can be specified.
Installation Details Filter Selection

Total assembly pressure drop flow curve

Oil Viscosity 30 cSt Relative density 0.856

Standard products table
Part number IL1115 Flow l/min 90 Thread BSP G1 Micron rating 125 Replacement element EIL1115 Supercedes E.IL.1115

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Non-Corrodible Inline Filter - Specification

Construction:
Housing and bowl moulded in polyester.
Element:
Stainless steel mesh. 125 micron*.
Max. flow:
120 l/min.
Installation Details
Max working pressure:
7 bar.
Thread:
G1.
*For alternative media consult Parker Filtration Note: When using with water, protect from freezing.
Working temperature:
-30C to +80C. (+60C water).
Seal:
Nitrile.
Bowl tightening torque:
12 Nm.
Bowl tightening note:
A box or ring spanner is recommended.
Flow direction:
From outside to inside.
Weight:
0.5 Kg.

Total assembly pressure drop flow curve
Oil Viscosity 30 cSt Relative density 0.856

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

210 Parker Hannifin Filter Division Europe FDHB200UK. Section 30

Drive Couplings

Technical Data

Materials To select coupling model check application to establish Coupling halves running load condition. Sintered Steel Check chart for factor (F) and apply factor (F) to *Rating of Sleeve coupling formulae. This answer you now apply to *Rating/100 Nylon 66 rev/min below. Max temp sleeve It is advisable always to check shaft sizes being used on 83C application and check with dimension H.
Factor (F) Application Electric motor Petrol/diesel engine Uniform load 1.00 1.20 Medium shock 1.25 1.50 Heavy shock 1.75 2.00
HP of application x 100 x F*Rating of coupling= rev/min of application
Installation Details

Max *Rating/ CHC J
speed 100 rev/min Weight A B C D E F G max min pilot
Part number prefix rev/min kW hp mm mm mm mm mm mm mm bore bore bore
DC28* 5000 0.75 1.00 0.4 40.0 66.0 44.5 38.0 4.0 104.0 84.0 28.0 10.0 7.0
DC42* 5000 1.32 1.75 0.75 42.0 90.0 60.0 42.0 4.0 115.0 88.0 42.0 14.0 10.5
DC55* 4000 6.00 8.00 2.05 59.0 125.0 83.0 65.0 4.0 158.0 122.0 55.0 19.0 16.0 min 38.1 max

Height of keyway from base of bore Assembly data
Metric Imperial Standard bore BS 4500, (1985) BS 1916, Part 1, (1985) Standard keyway BS 4325, Part 1 (1980) BS 46, Part 1, (1985)
1.
Maximum angular misalignment is 2. Maximum radial misalignment is 0.4mm. 2. Ensure that the Parker Filtration drive coupling gear hubs are an easy fit to their respective shafts. Do not use heavy blows to force the hubs on.

3.
When in position, the hubs should have a gap of 4mm as denoted by E dimension.

4.
Tighten grub screws to locate both gear hubs on to their respective shafts.

Ordering Examples Reservoir Equipment

Drive Couplings

Ordering Information
Model DC.28

Model DC.42

Model DC.55

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

212 Parker Hannifin (UK) Limited Filter Division Europe FDHB200UK. Section 30

Multiclamp

Multiclamp

Planning with Multiclamp
When only the best Clamping System will do ....specify Multiclamp
Multiclamp is a system. A system of components, each one engineered to a high standard C that together build to provide effective, all-purpose pipework clamping. Multiclamp offers creative and cost-effective environmental benefits to the system designer and installer. Creating accurate runs of varying diameter tubes, pipes, hoses and cables in all industries.
Secure Multiclamp installations ensure a leak free, noise free and vibration free system.
The neat design of pipe line runs offers easy maintenance of machinery and plant equipment. Visual planning of line runs is straightforward with Multiclamp
C accurate installations can beachieved without skilled labour C keeping costs down and quality up.
These notes have been compiled to assist in planning your Multiclamp system.
Multiclamp offers considerable flexibility. For example, it can fit in with a factory installation that is being built in phases.
Should a last minute change in pipe diameter occur during installation, an alternative rubber bush is likely to be all that is required. Not a complete and expensive re-think of the installation.
Multiclamp metal components can be sprayed to match a vehicle livery or plant installation and, if installed properly, should require no maintenance.
Installation is simple and requires no experience
Anyone can use Multiclamp and only the basic, everyday tools are required.
From one pipe to almost any number C because each Multiclamp position can be visually sighted and its position adjusted C an almost guaranteed straight run can be obtained. Equally, changes of plane or direction can be achieved simply and securely.

Your maximum pipe size will determine the series to use. There is a degree of versatility provided by the rubber bushes. You choose from single or multistacked Multiclamp, whichever suits your particular installation requirements.

214 Parker Hannifin Filter Division Europe FDHB200UK. Section 31
Group pipe sizes together to obtain the most economical use of three basic Multiclamp Series.
Some sites will require all pipes mounted in one single plane C either vertical or horizontal.
When stacked modules are preferred, the only work to be done on the Multiclamp is to saw off the desired length.
If a large number of pipe lines are to be run, it is recommended that the upper clamping unit is simply cut into two lines only, and progressively assembled by securing two pipes at a time. It will be recognised that most odd lengths on site will be used, and one man can easily cope with a large number of pipe lines by this simple progressive build up. This assembly will provide easy access for servicing and replacing pipes. This method also reduces the quantity of Stacking Nuts and Studs by 50%.
If a factory installation is being built in phases, it would be wise to leave the first phase with a lower clamping unit and Stacking Nuts in position ready to receive pipe runs for the next building phase.

Specification

Dimension details supplied in product configurator

Multiclamp C 12 or 16 holes Split Bushes

Split bushes are ordered in sets only
i.e. 1 set of bushes = 10 bushes of one size

Material Specifications
Thread
Zinc plated steel with anti-corrosive, full passivate. Multiclamp can also be multi-stacked using stacking studs and nuts. Series 10 and 16 clamp is supplied in lengths of 603mm and Series 32 in lengths of 1206mm. These can be simply cut to the required lengths for installation.
Note: For stainless steel version please consult Parker.

Stacking Nuts Stacking Studs
B
A

Series 10 will accept pipe or hose diameters from 6mm up to 20mm maximum. Series 16 from 6mm up to 28mm and Series 32 from 10mm up to 50mm. Across the 3 Series, there are 26 different high-quality split rubber bushes to select from to cope with any combination and number of different pipe and hose diameters in the same run.

Mounting Adaptors Weld Plate

Stacking nuts are ordered in sets only. Stacking studs are ordered in sets Mounting adaptors are not ordered Weld plates are ordered in sets only.
i.e. 1 set of stacking nuts only. i.e. 1 set of stacking studs in sets. i.e. 1 off mounting adaptors i.e. 1 set of weld plates
= 50 stacking nuts of one size. = 50 stacking studs of one size. = 1 single piece. = 10 weld plates.

Pipe Clamp System

Multiclamp

Ordering Information -Series 10
Product configurator

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
Ordering Information -Series 16
Product configurator

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.

216 Parker Hannifin Filter Division Europe FDHB200UK. Section 31
Ordering Information - Series 32

Product configurator

Note 1: Part numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: Alternate displayed part number selection will require you to contact Parker Filtration for availability.
How to build Multiclamp Reservoir Equipment

Speed Control and Needle Valves

Specification

Construction:
Brass 58 C UNI 5705 (G3/4 model-steel)
Nickel plated.

Speed control valve/check valve crack pressure:
0.5 bar.
Max. working pressure: Panel mounting:
210 bar. A retaining nut for panel mounting is

Operating temp. range: included with every option.
-20C to +100C. Filtration recommendation:
Fluid compatibility: Parker Filtration 25 micron absolute system
Petroleum-based oils. filtration is desirable to ensure acceptable

reliability and service life.
Sizes:
G1/4, G3/8, G1/2 and G3/4.
G1/4,G3/8 and G1/2 options G3/4 option
.47.0

Ordering Information
Speed Control Valves C white caps

Needle Valves C orange caps

218 Parker Hannifin Filter Division Europe FDHB200UK. Section 32
Technical Data

Pressure drop (P) flow characteristics with mineral oil at 30 cSt viscosity
Speed Control Needle Valve
Graphs for needle/shut-off valves and speed control valves with flow A-B (controlled flow
through needle).
Flow setting by number of turns of control knob is indicated on the body graduated scale.
Graphs for speed control valves. Flow B-A (flow through check valve), with needle valve portion in fully open and fully closed positions.

Inline Check Valves
Specification

Construction:
Steel UNI 5105.
Ball and spring:
Chrome finished steel.
Retainer:
Nylon.
Flow rates:
From 20 l/min to 150 l/min.

Max. working pressure:
350 bar. Circuit symbol
Valve crack pressures:
0.35 and 4.5 bar.
Installation Details

Technical Data Ordering Information
Pressure Drop Flow Curves Standard products table

220 Parker Hannifin Filter Division Europe FDHB200UK. Section 32
Single Station Gauge Isolator Valves

Specification

Construction:
Single Station: Cast iron and steel. Knurled aluminium knob with Twist to lock or push to read type.
Max. working pressure:
350 bar.
Port size:
Single Station: G1/4.
Weight:
Single Station: 0.90 Kg.
Single Station Installation Details
80.0 27.0
HEX nut 38.0 A/F
91.0
90.0
57.0 13.0
36.0 21.0
29.0 27.7

G1/4 TYP 3 positions
20.0 SQ28.0 26.0
54.0
Operation Details

Ordering Information

Standard products table
Part number Description Weight
GI1486 Single station gauge isolator twist to lock type 0.90 Kg
GI1414 Single station gauge isolator push to read type 0.90 Kg

Reservoir Equipment

63mm Dia. Pressure Gauges

Specification

Construction:
Case: Natural finish stainless
steel.
Window: Non-splintering clear
acrylic glass.

Movement: Cu alloy. Dial: White plastic, with pointer stop pin. Pointer: Black plastic.
Liquid filling:
Glycerine 99.7%.
Working pressure:
Max 75% of the full scale value.
Process temperature:
+ 60C maximum.
Accuracy:
1.6% FSD.
Wetted parts connector:
Copper alloy.
Bourdon tube:
< 60 bar = Cu alloy, C-type,
soft soldered.
> 60 bar = Cu alloy, helical type,
soft soldered.

Ordering Information

Bottom Connection
Part number PGB0631010 PGB0631016 PGB0631025 PGB0631040 PGB0631060 PGB0631100 PGB0631160 PGB0631250 PGB0631400 PGB0631600 PGB0631004 Supercedes PGB.0631.010 PGB.0631.016 PGB.0631.025 PGB.0631.040 PGB.0631.060 PGB.0631.100 PGB.0631.160 PGB.0631.250 PGB.0631.400 PGB.0631.600 PGB.0631.004 Pressure range 0-10 bar 0-16 bar 0-25 bar 0-40 bar 0-60 bar 0-100 bar 0-160 bar 0-250 bar 0-400 bar 0-600 bar 0-4 bar Connector type G1/4 Bottom G1/4 Bottom G1/4 Bottom G1/4 Bottom G1/4 Bottom G1/4 Bottom G1/4 Bottom G1/4 Bottom G1/4 Bottom G1/4 Bottom G1/4 Bottom

Installation Details
Panel Mounting

222 Parker Hannifin Filter Division Europe FDHB200UK. Section 32
Reservoir Equipment

100mm Dia. Pressure Gauges

Specification

Construction:
Case: BS 304 S15 stainless
steel.
Window: Acrylic.

Movement: Brass.
Dial: White aluminium.
Pointer: Black aluminium.

Liquid filling:
Glycerine 98%.
Working pressure:
Full scale value.
Process temperature:
+ 60C maximum.
Accuracy:
1.0% FSD.
Wetted parts connector:
Copper alloy.
Bourdon tube:
< 100 bar = Cu alloy, c-type,
soft soldered.
> 100 bar = stainless steel 1.4571,
helical type, brazed.

Ordering Information

Bottom Connection

Installation Details
Panel Mounting
Bottom Connection Panel Mounting (Lower Back)

Part number PGE1001010 PGE1001016 PGE1001025 PGE1001040 PGE1001060 PGE1001100 PGE1001160 PGE1001250 PGE1001400 PGE1001600 PGE10011000 Supercedes PGE.1001.010 PGE.1001.016 PGE.1001.025 PGE.1001.040 PGE.1001.060 PGE.1001.100 PGE.1001.160 PGE.1001.250 PGE.1001.400 PGE.1001.600 PGE.1001.1000 Pressure range 0-10 bar 0-16 bar 0-25 bar 0-40 bar 0-60 bar 0-100 bar 0-160 bar 0-250 bar 0-400 bar 0-600 bar 0-1000 bar Connector type G1/4 Panel G1/4 Panel G1/4 Panel G1/4 Panel G1/4 Panel G1/4 Panel G1/4 Panel G1/4 Panel G1/4 Panel G1/4 Panel G1/4 Panel

Dimensions (mm) Bottom Connection
b 0.5 b2 1 D1 D2 e G SW Weight Kg
48 81.5 107 100 8 G1/2 22 0.80